PHOTONICS-OPTICAL  :  LASERS  :  OPTICAL BREADBOARD  :  INTERFEROMETER  :  MOTION CONTROL  :  MICROSCOPES & LAMPS  :  LAB & PROCESS CONTROL  :  MICROWAVE-RF  :  TEST EQUIPMENT  :  TOOLS & HARDWARE  :  GLUE  :  COMPUTER  :  VIDEO EQUIPMENT  :  ELECTRONIC COMPONENTS  :  WELDERS & WIRE BONDERS  :  PLC  :  EQUIPMENT WANTED  :  SALES  :  HOME  :  E-MAIL

Opto-Mechanical Breadboard Components

NEWPORT Breadboard Mechanical Components (Mirror & Lens Mounts, Translation Stages, Posts, etc.)
OTHER Breadboard Mechanical Components (Mirror & Lens Mounts, Translation Stages, Posts, etc.)
Motorized Translation Stages and Actuators
Stage Controllers and Drivers
Shutters
Miscellaneous
Contact Information and Sales Terms

NEWPORT BREADBOARD COMPONENTS
Rods, Rails, Mirror, Filter, and Lens Mounts, and Translation Stages
Manufacturer Model No. Description Quantity
Price Ea.
 Notes
Newport 70 1.5" x 14" Rod w/ rack
0
SOLD
Base not included
Newport 340-C Clamp
3
50.00
Unused
Newport  370, 375 Clamp w/ pinion for 1.5" rod 0 SOLD 370, 375 look identical
Newport 380 Clamp w/ base for 1.5" rod, short
1
47.00
includes extendable rod similar to 384
Newport 381 Clamp with base for 1.5" rod, long 2 53.00 .
Newport  383 Clamp with base for 1.5" rod, long 1 53.00 extendable rod not included
Newport 420 Translation stage, 1" travel
1
70.00
No micrometer or adjustment screw. Motorizer shown in photo is not included.
Newport 450A Miniature translation stage
1
80.00
.
Newport M462-X
Metric
Single axis translation stage.
6
150.00
Micrometer and micrometer mount are not included.
Newport M462-XY
Metric
Two axis translation stage.
1
425.00
No micrometers are included.
Newport M462-XY
Metric
Two axis translation stage.
1
275.00
No micrometers, micrometer mounts, or base are included.
Newport M462-XY (DIFF)
Metric
Two axis translation stage with 2 micrometers.
2
800.00
Newport DM-13 differential micrometers
Newport M462-XY (EXT)
Metric
Two axis translation stage. One of the two micrometer mounts attaches directly to the breadboard and can accommodate 1 or 2" micrometers.
2
300.00
No micrometers are included.
Newport M462-XY (L)
Metric
Two axis translation stage with 2 micrometers.
1
650.00
Newport HR-1 large diameter 0.002 mm / div. micrometers
Newport 466 Three axis flexure stage with adjusters.
2
600.00
.
Newport 562-XYZ / 562F-TILT (LH) Ultra-Align stainless steel XYZ stage with 3 SM13 micrometers and 562F Pan/Tilt attachment and adjustment screws
1
SOLD
Left Hand
Newport 562-XYZ / 562F-TILT (RH) Ultra-Align stainless steel XYZ stage with 3 SM13 micrometers and 562F Pan/Tilt attachment and adjustment screws
1
SOLD
Right Hand
Newport M562-XYZ
Metric
Metric Ultra-Align stainless steel XYZ stage with 3 SM13 micrometers
1
SOLD
.
Newport M562-XYZ / 562-TILT
Metric
Metric Ultra-Align stainless steel XYZ stage with 3 SM13 micrometers and 562 Pan/Tilt attachment and adjustment screws
0
SOLD
.
Newport 610 Ultra resolution mirror mount, 13 deg. range, sub arc second resolution, coarse and fine micrometer adjustments on each axis. For up to 3" mirrors.
1
195.00
.
Newport 620-4 Gimbaled mirror mount, 10 deg. range, for 4" mirrors.
4
240.00
.
Newport 620-6 Gimbaled mirror mount, 10 deg. range, for 6" mirrors.
1
300.00
Includes a 6" dia. x 1/2" t 1/10 wavelength mirror
Newport 625A-2 2" Mirror mount w/ micrometers for 1.5" post
2
140.00
.
Newport 811 Laser Mount with micrometers
2
225.00
.
Newport A-1.25-1 Adapter, 1" for MM-2A and MM200A series mounts
2
6.00
.
Newport BC-1 Base Clamp
2
4.00
.
Newport CL-4 Tie down clamp
2
10.00
.
Newport CLM-C Camera Lens Mount, "C" Mount Lens 2 35.00 .
Newport DM-13 Differential micrometer 4 300.00 .
Newport/Klinger/Micro Controle EQ80-E Right angle bracket, 96 x 99 x 102 mm  Mounting faces 80 x 81 mm. 40 mm center aperture. DIMENSIONS
3
45.00
Hole pattern is not the same as that shown in current catalog. Compatible with UMR or UTR Series stages.
Newport/Klinger/Micro Controle EQ120-E Right angle bracket, 160 x 160 x 145 mm  Mounting faces 120 x 145 mm. 50 mm center aperture.
1
70.00
Hole pattern is not the same as that shown in current catalog. Compatible with UMR or UTR Series stages.
Newport/Klinger/Micro Controle EQ120-I Right angle bracket, 120 x 120 x 110 mm  Mounting faces 100 x 120 mm. 50 mm center aperture.
1
100.00
Has 4 extra holes drilled in both faces. Compatible with UMR or UTR Series stages.
Newport GM-1 Compact gimbal mount 3 45.00 Base is not included
Newport GM-1 w/ Beam Splitter Compact gimbal mount with beam splitter (at Brewster angle?)
1
50.00
.
Newport HR-1 Long travel, high resolution micrometer.
1
150.00
25 mm (1") travel. 2 um graduations, 0.025 um resolution.
Newport LP-1 5 axis gimbal optic mount, max. optic dia. 1.375"
2
200.00
with LPLH-1T optic holder
Newport LP-05-XY 2 axis gimbal mount
2
40.00
.
Newport MRL-6M Miniature rail, 6". Can be combined end to end to form longer rails.
0
SOLD
The MCF carriers are available separately.
Newport MM-2A w/ Prism Mirror mount with 12 mm beam splitter cube
2
60.00
The prism mounting plates each have 5 mm entry and exits openings
Newport MCF Carrier for MRL-xx rail
6
11.00
Use with MRL-6M rails available separately
Newport M-PO46BD-50 Pan, Tilt, and Rotation Stage for 25.4 mm optics with 50 mm optical axis height.
2
850.00
Each axis has a New-Focus 8321 Picomotor actuator attached
Newport RSX-2 Compact rotation stage. 3" platform, 4 arcmin. resolution. 15 kg load capacity.
0
SOLD
.
Newport SA-18-30 Aluminum plate, 18 x 30 x 1/2", black anodized. Has 1/4-20 tapped holes on a 1" x 1" grid.
0
SOLD
.
Newport SM-25 Metric micrometer. Reads directly in 10 um units, with vernier readings of 1 um. NEW.
8
$55.00
Compatible with 461/462, 561/562, 423/433/443, 426/436, 460A, 460P, 401/406, RS, and GON Series stages.
Newport Ultima U100-A Gimbal mount with Newport UPA-PUZ1 mirror mount.
1
50.00
Actuators shown in photo are not included.
Newport Unknown Model Bare fiber holder
1
10.00
.
Newport URL-18 Precision optical rail, 18"
1
140.00
.





BREADBOARD COMPONENTS - OTHER MANUFACTURERS
Rods, Rails, Mirror, Filter, and Lens Mounts, and Translation Stages
Manufacturer Model No. Description Quantity
Price Ea.
Notes
Brevett 234175 Iris Diaphragm, 1" to 3", 4.93" OD Mounted on 6" square aluminum plate.
2
50.00
A second unit is available at $40.00 not mounted on plate
Coherent 22-8429 Centering/Focusing Lens Holder
1
100.00
Same as Ealing 22-8429
Coherent 61-2937 Variable angle laser mount for 1.75" (44.5mm) cylindrical lasers.
1
75.00
17 adjustment range.
Daedal 2535 2.6" diameter rotary table. 1 80.00 0.5" through hole.
Daedal 4452 2" travel translation stage w/ 9526E micrometer. 5" x 5" x 1" platform. Bottom has 2 holes for 1/4" screws on 4" centers. 1 200.00 2" Through-hole. No micrometer
Daedal 4499 Z-Axis bracket, can be used with 4452 stages listed above. 1 50.00 .
Daedal 4532 1" travel translation stage. 2.6" x 2.6" x 1" platform. Bottom has 2 through holes for 1/4" screws on 2" centers. 1 65.00 Needs a micrometer with 0.375" mounting diameter (Not included).
Daedal 20001 360 degree rotary stage, 4.75" dia., 1.50" through hole. Vernier: 6 arc minutes, 120:1 drive ratio
2
275.00
.
Daedal CR1740E3 Translation stage, crossed roller bearing. With 1" micrometer drive.
1
150.00
The micrometer limits travel to 1" but actual travel is greater.
Ealing 21-8551 Adjustable slit aperture. Maximum opening 0.75 mm, slit length 4 mm, may be rotated through 360 degrees, mounted on 4" x 4" baffle, post not included.
1
100.00
A third aperture is available at $90.00. It is mounted on a 1.75 x 2.75" aluminum plate.
Ealing 23-1563 Precision calibrated iris diaphragm, aperture 4 mm to 52 mm
1
175.00
.
Ealing/Coherent 22-8767 Rotatable mount for 4" (101.6mm) circular targets or polarizers. Brass construction.
2
200.00
Choice or green or black paint.
Edmund 38-526 Microminiature 0.125" travel linear positioning stage. 80 TPI adjustment screw with 0.5 um sensitivity. Center aperture tapped for #8-32 screw. Body size 1.04 x 0.44 x 0.20". 0 50.00 Two of the 38-526 stages can be connected to make a two axis X-Y stage (Edmund model 38-527) using two 0-80 screws.
Edmund 38-531 Microminiature 0.5" travel linear positioning stage. 80 TPI adjustment screw with 0.5 um sensitivity. Center aperture 5/16". Body size 1.74 x 0.66 x 0.29". 8 55.00 To form a two axis X-Y stage (Edmund model 38-532) connect two of the 38-531 stages using two 0-80 x 3/16" screws (not included).
Edmund J34-766 X-Y Positioning Stage 2 105.00 .
Information International Rack and pinion Rack and pinion stage, 1.5" travel. Knob extends 1.9" from base for clearance.
1
40.00
.
Information International Tilt mount Tilts +/-7.5, fits 1/2" post, has fine pitch adjustment screw.
1
60.00
.
ISL Unknown Model Mount for 2 filters. 3 screws on rear filter/mirror allow for adjustment of relative position between filters.
1
50.00
.
Jodon VBA-200 Mount for variable beam splitters up to 4.4" diameter. Fits 1" diameter posts.
1
50.00
Includes scratched beam splitter plate and 1" x 3" post.
Klinger / Micro Controle Unknown Model Translation stage, 25 mm travel. Top 93.4 x 80 mm. Height xx mm. Made of stainless steel.
4
175.00
Top has four 4 mm threaded mounting holes arranged in 1 63 mm square.
Klinger / Micro Controle Unknown Model XY Translation stage, 25 mm travel. Top 93.4 x 80 mm. Height 36 mm. Made of stainless steel.
1
375.00
Top has four 4 mm threaded mounting holes arranged in 1 63 mm square.
Klinger / Micro Controle Unknown Model XY Translation stage, 25 mm travel by 50 mm travel. Made of stainless steel.
1
450.00
Top has four 4 mm threaded mounting holes arranged in 1 63 mm square.
Klinger / Micro Controle Unknown Model XZ Translation stage, 25 mm travel by 25 mm travel. Stainless steel stages with aluminum right angle bracket.
1
450.00
.
Klinger / Micro Controle Unknown Model Vertical stage, 12.5 mm range, micrometer drive. Stainless steel top is about 75 x 79 mm.
1
400.00
Top & bottom mounting holes are arraigned in 34 and 63 mm squares.
Klinger / Micro Controle UTR80SA Metric Rotary stage, 80 mm diameter, 50 mm aperture. Manual drive, 360 coarse adjustment range and 4 fine with 0.001 sensitivity
1
400.00
Metric mounting holes. Includes an 80 mm sq. top mounting plate and 4 BR series bridles.
Klinger / Micro Controle UZS80MS.1 Metric Vertical stage, 4 mm range, manual drive. Stainless steel top is about 76 x 80 mm.
1
800.00
Metric mounting holes. Top mounting holes are arraigned in 34 and 63 mm squares.
Line Tool Co. 102-RH XY Translation stage with with micrometer drive. 2" travel. Load capacity is 25 pounds.
1
625.00
Top slide has 12 #10-32 tapped holes. Base has 4 drilled and counterbored mounting holes.
Line Tool Co. A-LH XYZ Translation stage. 13 mm (1/2") travel.
2
400.00
Starrett micrometers
Line Tool Co. A-RH XYZ Translation stage. 13 mm (1/2") travel.
1
400.00
Starrett micrometers
Line Tool Co. A-RHFF XYZ Translation stage with fine feed attachments. 1/2" coarse travel at 0.025" / revolution (0.001" / thimble division), 0.010" fine travel at 0.001" / revolution (1.0 u / thimble division).
1
900.00
.
Melles Griot 07 LHA 004 Adjustable lens holder. For lens diameters between 5 and 25.5 mm.
2
35.00
Post shown in photo is not included.
Melles Griot 07 LHC 001 Adjustable cylindrical lens holder
1
45.00
.
Melles Griot 07 TEZ 004 Vertical Translation Stage, 10 mm travel, 65 x 65 mm platform, 5 kg load capacity, 1/4-20 tapped holes, steel construction
1
320.00
The actuator shown is not included.
Melles Griot 07 TSC 004 ? Translation stage, 25 mm travel, 65 x 65 mm platform with 12 1/4-20 threaded holes, 16 x 1.0 mm threaded center hole. The bottom plate has 4 through holes for 1/4" screws arranged in a 2 x 2" sq.
1
135.00
I'm not sure of the model number. Identical to the 07 TSC 004 stage except for the top hole pattern. The micrometer shown in the photo is not included.
Melles Griot 07 TSC 007 Translation stage, 25 mm travel, 2" aperture, for center mount micrometer. The bottom plate has 4 through holes for 1/4" screws arranged in a 4 x 4" sq.
3
225.00
The micrometer shown in the photo is not included.
Melles Griot 07 TSC 008 Translation stage, 50 mm travel, 2" aperture, for center mount micrometer. The bottom plate has 4 through holes for 1/4" screws arranged in a 4 x 4" sq.
1
275.00
Micrometer reads in 0.01mm increments.
Melles Griot Unknown Model Focusing mount, 2" aperture. Helicoid barrel allows 1" linear travel without rotating components
1
100.00
.
Micro Controle Unknown Model Rotary stage. 80 mm OD, 50 mm aperture, 18.25 mm high. Stainless steel construction.
1
150.00
Continuous 360 coarse rotation, ~ 0.5 fine adjustment.
Micro Controle Unknown Model XY translation stage. 15 mm travel in each axis. Stainless steel construction.
1
325.00
Top plate 50 x 58 mm. Height with mounting plate 31.45 mm. Mounting plate 5.9 mm thick.
Mitutoyo Unknown Model Micrometer, 25 mm travel, 0.01 mm/division. Rotating flat tip.
1
25.00
10.00 mm mounting diameter. Has ratchet mechanism to prevent over tightening.
Mitutoyo Unknown Model Micrometer, 2.5 mm travel, 0.0001mm (0.1um)/division. Flat carbide tip does not rotate.
4
175.00
12.00 mm mounting diameter. Includes nut, mounting bracket, and tip accessory.
New Focus 8301 Picomotor micrometer replacement actuator. Travel 1/2", resolution <30 um.
0
SOLD
Will work with the NewFocus 8801 multi-axis driver / controller listed below.
New Focus 8301-V Picomotor micrometer replacement actuator. Travel 1/2", resolution <30 um.
0
SOLD
Vacuum compatible. Works with the NewFocus 8801 multi-axis driver/controller listed below.
New Focus 8302 Picomotor micrometer replacement actuator. Travel 1", resolution <30 um.
0
SOLD
Will work with the NewFocus 8801 multi-axis driver / controller listed below. Gimbal mount shown in photo is not included.
New Focus 8401 Rotary stage. Resolution <0.2 mrad. Stainless steel.
1
525.00
Will work with the NewFocus 8801 multi-axis driver / controller listed below.
New Focus 9962 6 inch pedestal riser. Top and bottom tapped for 8-32 screws.
6
25.00
Holding forks are not included.
OptoSigma 147-1550 Kinematic base.
1
50.00
65 x 65 x 25 mm
Optronic Design 331 Laser mount for 1" to 1.75" dia. lasers
1
110.00
.
Oriel 14501 Precision Gimbal Mount, 2"
1
125.00
.
Oriel 17720 Gimbal Mount, 2"
5
125.00
.
ThorLabs AP90 Right angle bracket 2.0 x 2.25 x 3.0
1
50.00
Mounts to ThorLabs post clamp above
ThorLabs C1506 Adjustable platform for 1.5" posts.
1
35.00
1.5" vertical adjustment range. 3" x 3" top plate has 25 1/4-20 holes on 0.5" centers.
ThorLabs CL1 & CL2 Clamps
1
5.00
ThorLabs clamps
ThorLabs KB3X3 Kinematic base, 3" x 3" x 1"
1
50.00
.
ThorLabs KM-1 Mirror mount threaded for 1" optics. Retaining ring is not included.
1
30.00
A second KM-1 is available for $5.00 without adjusting screws.
ThorLabs KM-1B Kinematic platform mount.
1
25.00
.
ThorLabsTMC MB-12 Breadboard, 12 x 12 x 1/2", 1/4"-20 holes on 1 x 1" spacing, black anodized aluminum
1
110.00
.
ThorLabs SM1L05 (2), SM1L10 (1), SM1L20 (3), SM1V05 (1) Lot of 7 stackable lens tubes. 1/2", 1", 2", & 1/2" Focusing
1
50.00
At least 1 SM1RR retaining ring per tube. No lock nut with SM1V05
ThorLabs Unknown Model Post Clamp for 1.5" Diameter posts
1
40.00
.
ThorLabs VC3 V-Clamp
1
25.00
.
TMC 75SSC-113-02 Breadboard, 23 x 23 x 2", 1/4"-20 holes, ferromagnetic stainless steel
1
400.00
.
Unknown 90 mm post 12 mm x 90 mm post, 6 mm x 1 threads 1 6.00 .
Unknown Base 2" Post holder on 2.56" dia. base, brass
4
20.00
Holds 12 mm to 9/16" posts
Unknown Beamsplitter Mount Adjustable beam splitter mount
1
30.00
.
Unknown Flexure Mount/Coupler Adjustable in X/Y and focus. 1 to 13 mm adjustable aperture
4
45.00
ST connector.
Unknown Gimbal Mount 80 TPI adjustment screws. Has mounting hardware for 1" optics
2
50.00
.
Unknown Post connector Connect two 0.5" dia. posts.
1
7.00
.
Unknown Unknown Model Aluminum right angle mounting bracket. Dim. 2 x 0.7 x 9.3". Two 1/4-20 mounting holes on 5" centers on vertical section. Priced/pair.
1
25.00
Two slots on base for 1/4" screws on 1" centers allow about 1/8" adjustment.
Unknown Unknown Model Flexure mount with 2 windows. Tilts left to right and front to back.
1
15.00
0.88" x 1.18" x 2.74"
Unknown Unknown Model 45 Mount for 2" elliptical mirror
2
20.00
Post 1.00" dia. x 1.25" long, OAL 2.86"
Unknown Unknown Model Mounting Ring for 2.5" diameter laser tubes
1
20.00
Unknown Unknown Model Tip/Tilt Plate. Anodized aluminum with brass and steel adjusters. Overall size 8" x 8", working area 6" x 6.1".
1
200.00
Mounting holes: Four #10 through holes arranged in a 3.2" square, plus three 10-32 tapped holes arranged in a triangle with two 4.72"and one 5.02" sides.
Unknown Post Post, 9/16" x 3 7/8"
1
7.00
.
Unknown Single Axis Stage 2" max. travel, with 2" Starrett micrometer, top 4" x 4" x 1.00". Four 4 mm threaded mounting holes on bottom, 2 slots for 5 mm bolts on top.
1
225.00
Stainless steel construction. Crossed roller slides.

Newport Corporation XJ-A, $400.00 (2-65-121226)
Pneumatic Isolation Mounts. 10.5" diameter x 25.5" high. Set of 4. Operational Notes. (02)

Triangular Rails and Mounts (Part numbers are for Ealing parts or equivalent).
For descriptions, available quantities, and price click this link.
The following part numbers are currently available: 11-5162, 2-4683, 22-6928, 22-2108, 22-7579, 22-8106, 22-8122, 22-8650, 22,8700, 22-8767, 22-9203, 44-5171.

 
TOP EMAIL


MOTORIZED ACTUATORS, ROTARY, LINEAR, and XY, TRANSLATION STAGES

ALM R4-060-AL0-23-H, $1200.00, Photo 2
American Linear Manufacturers - ALM, Rotary table, 4" diameter with 1" aperture and 60:1 gearing. A Minimotor SA 2444 S 024 B / K315 motor with Hewlett Packard HEDM-5500-J06 encoder and Minimotor SA 30/1, 134:1 gearbox drives the table's input shaft through a flexible helical coupling. There is a "home" switch installed. The table top has 4 mounting holes arranged in a 1.5" square pattern (The photos show a removable, black anodized, mounting plate that has 4 holes in a 1" x 2" pattern. The bottom of the stage has 4 counterbored through holes, for M5x0.8 or 10-32 screws, arranged in a 3.5" x 3.5" square pattern. The overall size of the stage, including the motor, gearbox, and encoder is 4.56" w x 10.8" l x 2.3" h. The motor/encoder connections are made through military style connectors while the limit switch connector is plastic. Mating connectors are provided. The mating connectors have about 6' of unterminated cable attached.

Burleigh PZS-100, $800.00, 2 Available
Burleigh PZS Series "MicroStages" flexure stage driven by piezoelectric pusher. The PZS-100 actuator provides up to 105 um travel with a 0 to 150 V input and has a capacitance of 0.8 uf. The resonant frequency is 420 Hz unloaded and 300 Hz with a 50 gram load. Maximum load rating is 2.5 kg and non-linearity is 6% and hysteresis is 20%. The cable terminates in a Lemo connector.

Burleigh PZS-100 / PZS-200, $2500.00
Three Burleigh PZS Series "MicroStages" flexure stages driven by piezoelectric pushers. This XYZ stage is made up of 2 Burleigh PZS-100 actuators and 1 Burleigh PZS-200 actuator. The PZS-100 actuators provide up to 105 um travel with a 0 to 150 V input and have a capacitance of 0.8 uf. Their resonant frequency is 420 Hz unloaded and 300 Hz with a 50 gram load. The PZS-200 actuator provides up to 300 um travel with a 0 to 150 V input and has a capacitance of 3.1 uf. It's resonant frequency is 400 Hz unloaded and 210 Hz with a 50 gram load. Both actuator types have a maximum load rating of 2.5 kg and exhibit non-linearity of 6% and hysteresis of 20%. A Burleigh manual tilt stage (shown in photos, model unknown) is provided. The 3 ~36" long cables terminate in a single connector.

Burleigh TS-100 / IW-702-00, $1500.00
Precision crossed roller bearing stage with Burleigh inchworm actuator. Stage travel is 50 mm, straightness is <= 1 um over the full range of travel. Maximum load is 30 kg. The inchworm actuator is a 50 mm travel, open loop type with about 4 nm resolution. This actuator is designed for operation with the Burleigh 6000 and 7000 series controllers. A special cable is required to use it with a CE-1000 or CE-2000 controller.

Burleigh TS-100 w/ Actuator, $1200.00
Precision crossed roller bearing stage with unknown model number 1" travel Burleigh inchworm actuator. Stage travel is 50 mm, straightness is <= 1 um over the full range of travel. Maximum load is 30 kg.

Burleigh TSE-150 (1) $2200.00
Single axis crossed roller bearing translation stage. 25 mm travel, motor resolution 0.4 nm, encoder resolution 0.05 um, uses a Burleigh Inchworm actuator and a Heidenhain encoder for feedback.

Burleigh TSE-150 (2) $4500.00
Two TSE-150 crossed roller bearing translation stages mounted at 90. Travel is 25 mm, motor resolution 0.4 nm, encoder resolution 0.05 um, uses Burleigh Inchworm actuators and has Heidenhain encoders for feedback. Has one Heidenhain APE-310-001 module. The other encoder goes directly to a Heidenhain readout.

Klinger B89 40798 003, $750.00 ?
Linear positioner, 8" travel, 3.5" x 3.5" table, limit switches, 100 oz/in NEMA 23 6 wire stepper motor, 5:1 inline gear box drives 5 TPI 1/2" diameter lead screw, way covers.

Klinger / Micro Controle / Newport Corporation, $975.00
Low profile motor driven rotary stage, 100 mm rotary table with 50 mm through hole, 35 mm overall height, width 110 mm, overall length 215 mm, length without motor section 105 mm, motor diameter 28 mm. Weight about 1.52 Kg. Internal limit switches. Has degrees readout on side.

Klinger / Micro Controle / Newport Corporation UR80-0.01, $1100.00, 2 Available
Klinger low profile motor driven rotary stage. The Klinger 80 mm diameter rotary table has a 30 mm clear aperture, 35 mm overall height, overall length of 171 mm, and its stepper motor is 28 mm across. It has Internal limit switches and readout in degrees on the side. UE30PP stepper motor drive.

Klinger UBG120MS, $1400.00
Goniometric Cradle, 0.001 deg. angular resolution, +/- 45 deg. travel, manual stage modified for stepper motor drive.

Klinger UBG200PP, Photo 2, $4800.00
Goniometric Cradle, 0.001 deg. angular resolution, +/- 45 deg. travel, stepper motor drive.

Klinger Unknown Model, $425.00
Vertical stage.

Klinger UZ80, $925.00
Motorized Vertical Translation Stage. 4.8 mm travel range, 0.1 um resolution, Stepper motor drive. Works with Klinger CC1.2 listed above.

Melles Griot 11 NCM 001, $625.00
Model 11NCM001 25 mm travel stepper motor actuator. Resolution: 10 nm, bidirectional repeatability: 100 nm, absolute accuracy: 1 um, and load capacity: 10 kilograms. These are the standard torque models with flat tips. 3 m cable.

Melles Griot 17 DRV 001, $425.00
Motorized actuator / modular drive, ~4 mm travel, 25 nm resolution, 0.5 mm / revolution of NEMA 17 stepper motor. Has position indicator, home switch and Lemo 8 contact connector. For use with Melles Griot NanoMax TS series of stages.

Melles Griot 17 PST 101, $600.00
Pneumatic Linear Precision Stage, 40-75 mm travel (minimum depends on adjustment of end stops), 2 um repeatability, top is 120 x 150 mm, horizontal mount capacity - 50 kg, vertical mount capacity - 10 kg, 40 PSI.

Mirror Mount, $100.00
Piezo driven tilting mirror for up to 1.5" diameter optics. Mirror is centered about 2.61 inches above bottom of mount.

Newport 850A-2-VC, $450.00
Motorized actuator. 2" travel. 262:1 gear ratio. For high vacuum use.

Newport 850B-1-HS, $325.00
Motorized actuator. 1" travel.

Newport 850B-4, $325.00
Motorized actuator. Gear ratio 256:1 (1616-262:1-16/5). 4" travel. Spherical tip

Newport 850G-HS, SOLD
Motorized actuator with manual coarse positioning. 2" travel. High speed 22:1 ratio. Non-rotating tip. Uses Newport UE17CC servo motor. (850G-HS 1624-22:1-16/5S).

Newport 850G, $625.00, 2 Available
Motorized actuator with manual coarse positioning. 2" travel. Standard resolution with 262:1 ratio. Non-rotating tip. Uses Newport UE17CC servo motor. (850G 1624-262:1-16/8).

Newport 860-05, $155.00, 7 Available
Motorized actuator, about 1/2" travel. Speed range 40 to 400 u/sec, resolution 0.02 um, 30 pound load capacity. Spherical tip. Course position readout in mm on one side or 0.1" increments on the other side.

Newport 860A-05, $200.00
Motorized actuator, about 1/2" travel. Resolution 0.1 to 0.5 um, 30 pound load capacity. Spherical tip. Course position readout in mm on one side or 0.1" increments on the other side.

Newport 860-1, $185.00, 2 Available
Motorized actuator, about 1" travel. 40 to 400 u/sec speed range, resolution 0.02 u, 30 pound load capacity. Spherical tip. Course position readout in mm on one side or 0.1" increments on the other side.

Newport CMA-12PP, $400.00, 10 Available
Motorized actuator, 12 mm Travel Open-loop stepper CMA Actuator.

Newport CMA-25CC, $340.00, 2 Available
DC open loop motorized actuator. Travel range 25 mm, speed 40 to 400 um per second. Limit switch to prevent over travel. Use with Newport 861, ESP100, and ESP300 motion controllers.

Newport ESP300-CMACC, $80.00, 2 Available
Cable adapter allows CMA-12CC and CMA-25CC actuators to be used with ESP300 controllers. Unused.

Newport MFM08CC, $500.00
Motorized low profile compact translation stage. 8 mm travel, 1.0 um repeatability, 5 kg load capacity, rotary encoder feedback, DC motor drive, backlash compensation. End of travel limit switches. Includes hardware for mounting vertically.

Newport PM500-A1, $1150.00, 2 Available
Micrometer replacement actuator, 0.1 um resolution, glass encoder, closed loop, 1" travel.

Newport RTM160PP, $2250.00
Newport ESP compatible rotation stage with Newport UE63PP step motor, 0.001/step. OD is 160 mm, I.D. is 110 mm. Has knob for manual positioning.

Newport URM100PP, $1850.00, Photo without insert installed.
Precision Rotation Stage. 100 mm diameter stainless steel 0.001 resolution rotary table fitted with a UE41PP stepper motor. Stage is 40 mm high x 105 mm square. Included mounting plate is 120 x 170 x 8 mm. This stage can be driven by the ESP300 and ESP 7000 controllers, as well as most of the other stepper motor controllers listed elsewhere on this page.

Newport Z354A, $650.00
Motorized Rotator. Similar to as current Newport model PR50PP. Uses 2-phase stepper motor UE16PPSC with 1 Full step = 0.02.

Oriel 13038, $475.00
Oriel precision motorized rotary stage with 1.94" clear aperture for 2" optics. 15 lb. (7 kg) max. load, 0.15 arc s resolution with Oriel 18000 series controllers or 0.75 arc s resolution with Oriel 18111 series controllers, max. rotating speed 24 deg. / min. 7.5 arc s uni-directional repeatability.

Oriel 13049, $575.00
Oriel / Ardel Kinamatic Division precision motorized 360 degree rotary stage with 1.75" clear aperture. 15 lb. (7 kg) max. load, 0.34 mrad resolution, max. rotating speed 10 deg. / sec. 0.17 mrad uni-directional repeatability. Variable reluctance stepper motor driven. Stepper motor can be half-stepped for higher resolution. Has knob for manual positioning. One revolution of motor shaft yields 0.5 degrees stage movement.

Oriel Model Unknown, $400.00
Oriel motorized vertical translation stage, minimum height 3.83", maximum height 4.80", with 5" x 5" top and bottom plates, driven by a 1" DC motor mike.

Oriel 18009, $750.00
Encoder Mike Dual Control Unit. Independent forward and reverse speed controls and readout for each axis. Readout displays position in microns. Requires 115/230 VAC, 50/60 Hz. Includes Operation Manual.

Oriel 18020, $150.00, 2 Available
DC Motor mike. Flat tip, 0.50" travel, 0.375" mounting diameter.

Oriel 18024, $150.00, 2 Available
DC Motor mike. Flat tip, 0.50" travel, 0.375" mounting diameter.

Oriel 18212, $275.00
DC Encoder mike with optical encoder. Type 1 mount (Starrett #463) with flat tip, 0.50" travel, 0.375" mounting diameter. Unused.

Oriel 18213, $250.00
DC Encoder mike with optical encoder. Type 1 mount with 0.06" radius spherical tip, 0.50" travel, 0.375" mounting diameter.

Oriel 18255, $225.00
DC Encoder mike with optical encoder. Type 1 mount (Starrett #463) with ball tip, 1.00" travel, 0.375" mounting diameter.

Oriel 18503, $250.00
Oriel / Ardel Kinamatic Stepper Mike Drive. Travel: 0.5". Resolution: 2 um / step in full step mode, 1.3 or 0.7 um in half step mode. Maximum speed 1 mm/sec. Unidirectional repeatability 2 um. Has manual positioning knob.

Oriel 18512, $275.00
Oriel / Ardel Kinamatic Stepper Mike Drive. Travel: 1.0". Resolution: 2 um / step in full step mode, 1.3 or 0.7 um in half step mode. Maximum speed 1 mm/sec. Unidirectional repeatability 2 um. Has manual positioning knob. Mounting threads are damaged. This actuator can be clamped into a fixture that accepts 0.375" diameter micrometers. Only 1 motor mike is include even though 3 are shown in the photo.

Oriel 25016, $600.00
Three axis rotator with 1 motor mike. 360 coarse and 16 fine (3 arc sec) rotation about the optical axis. Pan and tilt about the vertical (16) and horizontal (8) axes. Holds 2" optics.

Physik Instrumente M-521-5i, $2750.00, 3 Available
Precision translation stage with integrated motor controller. Travel 204 mm (8"). Resolution 0.1 um. Unidirectional repeatability 0.2 um. Max. velocity 20 mm / sec., Max load 100 kg. Zero backlash precision ground ball screw. Up to 27 'IntelliStages' can be controlled by a single RS-232 port. These stages can be configured as master or slave. Manual on CD-ROM is included. Cable and 24 VDC power supply are required for operation but are not included.

Physik Instrumente P-753.1CD, $1700.00
LISA Piezo NanoPositioning System. Flexure stage with integrated actuator. Closed loop travel >= 12 um, closed or open loop resolution <= 0.05 nm. Integrated capacitive feedback sensor. "ID" type voltage and sensor connections with stored calibration data, for use with digital controllers such as the model E750.CP. D-Sub connector.

Physik Instrumente P-753.11CD, $2000.00
LISA Piezo NanoPositioning System. Flexure stage with integrated actuator. Closed loop travel >= 12 um, closed or open loop resolution <= 0.05 nm. Integrated capacitive feedback sensor. "VL" type voltage and "C" x2 sensor connections, for use with analog or digital controllers such as the model E-610.C0*, E-500/E-503, and E-710.4CL. D-Sub connector. New. Identical in appearance to the P-753.1CD above.

 
TOP EMAIL


STAGE CONTROLLERS

Aerotech Unidex 11, $1850.00
Programmable 4 axis motion controller. Rear view.

Ardel Kinamatic Model A, $800.00
Motor Mike Control with two 5A-1X 1/2" travel motor mikes, one 10A-1X 1" travel motor mike, and 6 controller to motor cables. Can control up to 6 motor mikes one or two at a time using the top mounted X-Y joystick. The motor mikes have spherical tips, 0.375" mounting diameter. They are equivalent to the Oriel 18019 (1/2") and 18041 (1") "Type 1" motor mikes.

Burleigh 6000-1-1-1-3, $800.00
Burleigh 6000 Inchworm Motor Controller. Has boards and readout for a single inchworm actuator with encoder feedback.

Burleigh 7000-1-3, $1000.00
Three axis controller with display.

Burleigh 7000-1-0, $800.00
Multi-axis controller. Has boards for three inchworm actuators with encoder feedback. Axis 1 & 2 have ENC Count, Mot Cont, and HV Drive Modules, Axis 3 has Quad Count, Mot Cont, and HV Drive modules. Box also has Master CPU and Bus Extender modules for connection to another 7000 series controller. Serial No. E6030382. 19" Rack mount cabinet. Requires 80 to 230 VAC, 50/60 Hz.

Burleigh 7000-2-1, $1000.00
Multi-axis controller with display.

Burleigh 7000 Series boards and accessories, $25.00 Each
Master CPU, 03636-3
Bus Extension, 03823, 2 Available
Encoder Box, 7006, 4 Available

Burleigh CE-2000, $650.00
Closed loop command module for 3 inchworm actuators. SN: A6391048

Burleigh CE-2000 series boards, $50.00 Set
Spare boards for 2000 series controllers
Driver board set, 02760 Rev D and 02761 Rev A
Encoder board set, 02762 Rev A and 02763 Rev B, 2 Sets Available

Burleigh PCS-201, $300.00
Three axis controller. Three full revolutions on each axis easily provides 0.1 V resolution when connected to a PCS-250 Patch Clamp Driver.

Burleigh PCS-250, $250.00
Patch clamp driver.

Burleigh PZ-70M, SOLD
High voltage DC Op Amp, 0 to 1000 VDC. Dual output ranges 0 to 500 VDC into => 50 K ohms and 0 to 1000 VDC into => 100K ohms.

Burleigh RC-43, $400.00
Programmable ramp generator.

Kensington Laboratories 4000A, $1500.00, 2 Available
Two axis servo positioning controller. Expandable.

Klinger CC1.2 $700.00
Programmable stepper motor controller. 2 axis, with readout, computer controlled (RS-232 and GPIB) and manual control of speed and positioning, Tested using Klinger stage with front panel controls.

Klinger MD4 MC4, $1550.00
MC4 1 to 4 axis programmable stepping motor controller, GPIB, RS-232, or manual control. Includes Operator and Technical Manual. MD4 stepper motor driver (configured for 2 motors), 115 V, 200 W, 50/60 Hz.

Melles Griot 17 BSC 102/17 BSC 101, $5000.00
Three axis XYZ motion control system with the following parts: 17BSC102 Dual axis benchtop stepper motor controller, 17BSC101 Single axis benchtop stepper motor controller, both controllers have USB interfaces, 17MAX301 NanoMax-HS X-Y-Z 3 axis parallel flexure stage with piezoactuators with feedback on all axes, 3 (three) 17DRV001 stepper actuators - 50 nm resolution, 3 (threee) 17PAA620 or 17PAA621 stepper motor drive cable to mate with Lemo connectors on 17 DRV 001 actuatora.

New Focus 8601 $30.00, 5 Available
Picomotor multi-axis (3) to single axis adapter.

New Focus 8610, $80.00
Switch box for selection of 1 of 8 picomotors.

New Focus 8701, $220.00
Single axis Picomotor driver with manual.

New Focus 8801, $550.00, 3 Available
Multi axis Picomotor driver for use with New Focus Picomotor stages and actuators. Can control up to 8 channels as is or up to 24 channels in groups of three using New Focus model 8601 adapters. Includes copy of manual and one model 8601 Picomotor adapter with cable. Requires a +5 / +12 / -12 VDC power supply which is not included.

Newport 855C, $1250.00
Motion controller, 4 axis.

Newport 855K, $210.00, 2 Available
Handheld controller/display unit with cable for Newport 855C. Includes coiled control cable used to connect 855K with 855C.

Newport 855K, $140.00
Handheld controller/display unit with cable for Newport 855C. Includes coiled control cable used to connect 855K with 855C. The mylar keypad overlay works OK but has several dings in it and is raised on one edge as shown in the photo.

Newport AD-100, $625.00, 4 Available
Electrostrictive ultra-resolution actuator. AD-100 actuators have 13 mm coarse travel with <0.5 um resolution and 100 um fine travel with 0.06 um resolution. Load capacity over full travel is 10 pounds.

Newport ESA-C, $1950.00
Advanced electrostrictive actuator controller. Up to three actuators can be controlled manually from the ESA-C front panel, through the standard GP-IB interface, or through the three analog inputs. Includes copy of manual.

Newport ESA-C-SET100 w / Actuators, $3100.00
Advanced electrostrictive actuator controller plus three AD-100 ultra-resolution actuators. The actuators can be controlled manually from the ESA-C front panel, through the standard GP-IB interface, or through the three analog inputs. The AD-100 actuators have 13 mm coarse travel with <0.5 um resolution and 100 um fine travel with 0.06 um resolution. Load capacity over full travel is 10 pounds. Includes copy of manual.

Newport ESA-CXA, $700.00, 2 Available
Advanced electrostrictive actuator controller for one to three actuators. The actuators can be controlled manually from the ESA-C front panel or through the three analog inputs.

Newport ESA-CXA-SET30 w / Actuators, $2500.00
Advanced electrostrictive actuator controller for one to three actuators. Three ESA1330-OPT-01 ultra-resolution actuators are included. The actuators can be controlled manually from the ESA-C front panel or through the three analog inputs. The actuators have 13 mm coarse travel with <0.5 um resolution and 30 um fine travel with 0.04 um resolution. Load capacity over full travel is 10 pounds.

Newport ESP300-11111N, SOLD
Three axis motion controller/driver with 3 driver modules installed. "Plug and play" compatible with Newport ESP stages. Stages from Newport (Except CMACC, which requires a special cable, and V6 versions) and other makers are easily added. Includes display and GP-IB options plus a copy of the users manual. This is the same as current model ESP300-111111 with a standard power supply.

Newport ESP300-11NN1N, $1300.00
Three axis motion controller/driver with 2 driver modules installed. "Plug and play" compatible with Newport ESP stages. Stages from Newport (Except CMACC, which requires a special cable, and V6 versions) and other makers are easily added. Includes GP-IB option and a copy of the User's Manual. This is the same as current model ESP300-11NN11 with a standard power supply.

Newport ESP300-11N11N, SOLD
Three axis motion controller/driver with 2 driver modules installed. "Plug and play" compatible with Newport ESP stages. Stages from Newport (Except CMACC, which requires a special cable, and V6 versions) and other makers are easily added. Includes display and GP-IB options plus a copy of the User's Manual. This is the same as current model ESP300-11N111 with a standard power supply.

Newport ESP300-R, $30.00, 4 Available
ESP300 19" Rack Mount Brackets. Left and right side.

Newport ESP6000, $2100.00
High performance 32 bit PCI bus motion controller. PCB Assy: 23017-01, Rev. N, SN: G2418.

Newport ESP6000 DCIB, $650.00
Two axis motor driver interface box for use with ESP6000 motion controller. Drives two Newport 850F series, 12 VDC actuators. Includes interface cable to ESP6000 motion controller. Motion controller and power supplies are not included.

Newport ESP6000 DCIB, $1150.00
Four axis motor driver interface box for use with ESP6000 motion controller. Drives four Newport 850F series, 12 VDC actuators. Includes interface cable to ESP6000 motion controller. Motion controller and power supplies are not included. The photo shows a nearly identical in appearance two axis controller.

Newport ESP6000 DC Iinterface Box, $1200.00
Four axis motor driver interface box for use with ESP6000 motion controller. Drives two Newport 850G series, 12 VDC actuators, 1 Newport 850G-HS, 24 V actuator, and 1 UE16CC, 12 V actuator. Motion controller and power supplies are not included.

Newport ESP7000, $5300.00
Universal Motion Controller/Driver. Six Axis Universal Motion Controller/Driver with LCD Display Option. Each of the 6 driver modules will drive 2 or 4-phase stepper and brush DC servo motors including most of Newport’s standard stages. The ESP7000 is plug-and play compatible with Newport's ESP compatible stages and actuators. PID and gearing parameters are easily set for non-ESP stages. Positioning modes include synchronized and non-synchronized point-to-point, jogging, linear or circular interpolation, electronic gearing, and continuous path contouring. The ESP7000 also has 24 Opto22 compatible digital I/O lines and an 8-channel, 16-bit data acquisition sub-system. IEEE-488 (GPIB), USB and RS-232-C computer interfaces, a 3.5" floppy disk drive, and User's Manual are standard.

Newport FX-1000, $7500.00, Controller Rear View, Newport Catalog Page, Newport Spec Sheet
FX1000 Automated Fiber Alignment System for high speed coupling of single-mode fibers. Automated multi-axis alignment, x/y 0.01 micron resolution, z 0.1 micron, plus pitch, yaw, and dither. Has gradient search, GPIB and RS-232 communication options. Includes: 0.01 micron resolution XY and 0.1 micron resolution Z stages (Z stage actuator is in need of repair or replacement), pitch, yaw, and dither actuators plus cables, programming and operators manuals. Can be mounted on an optical breadboard (not included) as small as 12" x 12" with a 1" hole pattern.

Newport MCABLE-3, SOLD
Standard interface cable between all Newport stepper and DC stages and controllers (except PM500 Series). 3 M Length. New.

Newport / Klinger MM2000-OPT, $125.00, 2 Available, $75.00, 1 Available
MM 2000 motion controller interface box with Interface Box to MM2000 controller cable. One MM2000-OPT box is available without a cable for $75.00.

Newport MM2000-RX, $1200.00
Two axis motion controller. With GPIB. Includes copy of manual and MM software on 5 1/4" floppy disk. Can be converted to a 4 axis controller by adding 2 driver modules.

Newport / Klinger MM2000-Universal Interface Box, $275.00
MM 2000 motion controller universal interface box.

Newport MM4000, $1800.00
Motion controller with 3 driver modules installed. Version 2.06 firmware. With GPIB. Includes 1 driver module for UE511CC 60V 2A closed loop motors (options 76,77, & 79) and 2 driver modules for UE404CC 30V 1A closed loop motors (options 72 & 73). The UE511CC module is currently set up for a MTM100CC1 stage. The UE404CC modules are set up for UZM160C0.05 and UTM100CC1HL stages. Requires 100-120 or 200-240VAC, 50/60Hz. Because to UE511CC module is double size a forth driver module cannot be added. Three driver to motor cables are also included.

Newport PMC300, $500.00, 2 Available
Power / Interface Module, 3 axis.

Oriel 18002, $150.00
Motor Mike Controller. Single axis. Resolution 0.05 um, minimum speed 0.5 um/sec. With attached power supply (switchable between 115 or 230 VAC).

Oriel 18008, $400.00
Single channel encoder mike controller. Included plug in wall transformer for 110 VAC operation.

Oriel 18011, SOLD
Encoder mike controller. Drives and controls up to three Oriel Encoder Mikes. Stand alone or computer operation through the RS-232 port. Constant speed scanning from 0.5 to 200 um/sec. Display resolution 0.1 um. Includes the instruction manual.

Physik Instrumente / Polytec, P-260, $750.00
Bench-top 3 channel amplifier for high-voltage PZTs. Each amplifier can output between 0 and -1000 VDC. In manual operation the output voltage for each channel is set by a 10-turn potentiometer in the range of 0 to 1000V. In remote operation mode the output voltage is controlled by an analog signal from -0 to +10 V applied to the BNC inputs on the rear panel. Multiplying by the gain factor of 100, an output voltage range of -0 to 1000 V results. A 3 digit LED display shows the output voltage of each individual channel.

Physik Instrumente, P-263, $950.00
Bench-top 3 channel amplifier for high-voltage PZTs. Each amplifier can output between 0 and -1000 VDC. In manual operation the output voltage for each channel is set by a 10-turn potentiometer in the range of 0 to 1000V. In remote operation mode the output voltage is controlled by an analog signal from -0 to +10 V applied to the BNC inputs on the front panel. Multiplying by the gain factor of 100, an output voltage range of -0 to 1000 V results. A 3 digit LED display shows the output voltage of each individual channel.

Physik Instrumente (PI) C-842, $650.00
Two Channel Precision DC Motor Controller.

Physik Instrumente (PI) C-844.40, $2200.00
Four Channel Precision DC Motor Controller, Simultaneous control of up to 4 DC servo motors, fast 32 bit Digital PID V-ff servo loop, Integrated Linear Power Amplifiers (12 bit) and PWM outputs, Trapezoidal-Curve, S-Curve and Velocity Contouring, IEEE-488.2 and RS-232 interfaces, Electronic Gearing, Programmable Torque Limit. 100 to 240 VAC, 50/60 Hz. Manuals and software are included on CD-ROM.

Physik Instrumente E-463.00, $1675.00
Bench-top 3 channel amplifier for high-voltage PZTs. Each channel can output and sink 4 ma peak and 3 ma average current. In manual operation the output voltage for each channel is set by a 10-turn, DC-offset potentiometer in the range of 0 to -1000V. In external operation mode the output voltage is controlled by an analog signal from 0 to +10 V applied to the BNC inputs. Multiplying by the gain factor of -150, an output voltage range of 0 to -1500 V results. The DC-offset potentiometer adds a DC bias to the input, allowing continuous shifting of the input voltage range between 0 V to 10 V and -6.66 V to +3.33 V. Three 3 digit LED displays show the output voltage of each individual channel.

Physik Instrumente P864.10, $1750.00
Polytec PI 2 axis piezo electric controller/driver. Includes a PI E-809.00 three channel PZT Control module. The current equivalent is E-509. One three channel (only 2 channels are operational) PI E863.10 Low Voltage Piezo (LVPZT) Driver modules with outputs between -20 and +120 V that can be controlled manually with a 10 turn potentiometer and/or by applying an analog signal to the BNC input. A PI E-812.10 Power Supply module. A E-255.60 D/A module. A PI E-111 Display module with system on/off power control. The display module can display the output of the piezo drivers in volts or the movement of the actuators in microns. All of these modules are mounted in a 19" rack mount chassis. There are expansion slots for additional driver or electronics modules. This controller will work with the Polytec PI P-854.00 listed above.

Physik Instrumente P865.20, $1750.00
Polytec PI 2 axis piezo electric controller/driver. Includes a PI E-809.00 three channel PZT Control module. The current equivalent is E-509. Two PI E865.10 Low Voltage Piezo (LVPZT) Driver modules with outputs between -20 and +120 V that can be controlled manually with a 10 turn potentiometer and/or by applying an analog signal to the BNC input. The current equivalent is E-505. A PI Power Supply module E-812.10. A PI E-111 Display module with system on/off power control. The display module can display the output of the piezo drivers in volts or the movement of the actuators in microns. All of these modules are mounted in a 19" rack mount chassis. There is an expansion slot for a third driver module. This controller will work with the Polytec PI P-854.00 listed above. Two E865 Lemo to BNC (m) 15" output cables are included.

Physik Instrumente Model Unknown, $25.00, 6 Available
Cable, 15" BNC (m) to Lemo single pin connector. These lemo connectors mate with the driver/amplifiers on the Physik Instrumente P865-20 piezo controller listed above. These cables will not work with the PI E107 driver modules in the P275.30.

Profile Poco 4000, $650.00
Three axis position controller with feedback.

Queensgate Instruments AX100, $500.00
Piezo driver.

Sigma Tech (Sigma Koki) FC-101, $600.00
Two axis stepper motor controller. Has a mark on the inside of the LCD but all segments are functional and performance is not affected.

 
TOP EMAIL


SHUTTERS

Summit Technologies UV210700, $200.00, 3 Available
Electronic shutter, multiple leafs. 1" aperture.

Vincent Associates UniBlitz 225S17A0T5HB, $325.00
Electronic shutter. Aperture 25 mm, 40 Hz maximum repetition rate. Aluminum coated BeCu shutter blades. Has video camera "C" mount on one side, older Nikon mount on the other side.

Vincent Associates UniBlitz LS6W2, $300.00
Electronic shutter. Aperture 6 mm, 400 Hz maximum repetition rate. 7' long control cable is included. The driver board is $100.00 extra, only 1 driver board is available. Sorry, I don't have any schematics or other hook-up information on the driver board.

Vincent Associates VMM-D4, $650.00
Four channel shutter driver for independent control of 4 Vincent Associates/Uniblitz shutters. Maximum repetition rate depends on the shutter's rating. 115/230 VAC operation. Up to 8 VMM-D4 controllers can be daisy chained and controlled by a single RS232 serial port. Cables are not included. User Manual and power cord are included.

 
TOP EMAIL


MISCELLANEOUS

Information International, Model Unknown, $200.00
Filter holder. Moves four filters into or out of the light path using rotary solenoid actuators. Has photo sensors to indicate when each filter is in the light path and when it is in the home position. The filter openings are 44 mm. The center opening is 75 mm and the overall diameter is about 255 mm. The overall thickness is 60 mm. A cable is included for the photo sensors (mates to the round connector in the photos). The other connector is a 14 contact Amphenol 57-40140. The solenoids are Magton 23S44CW20-35-25 from Magnuson Engineers, Inc. The bottom cover was removed for the photo but is included.

 
TOP EMAIL


PHOTONICS-OPTICAL  :  LASERS  :  OPTICAL BREADBOARD  :  INTERFEROMETER  :  MOTION CONTROL  :  MICROSCOPES & LAMPS  :  LAB & PROCESS CONTROL  :  MICROWAVE-RF  :  TEST EQUIPMENT  :  TOOLS & HARDWARE  :  GLUE  :  COMPUTER  :  VIDEO EQUIPMENT  :  ELECTRONIC COMPONENTS  :  WELDERS & WIRE BONDERS  :  PLC  :  EQUIPMENT WANTED  :  SALES  :  HOME  :  E-MAIL

210